Alkali Metal–Promoted Facile Synthesis of Secondary Amines from Imines and Carbodiimides

We present here an efficient method for the hydroboration of aldimines (-C=N-) with pinacolborane (HBpin) using an alkali metal catalyst, potassium benzyl. The reaction was accomplished with unprecedented catalytic efficiency under mild and solvent-free conditions to afford the high yield of the corresponding N-boryl amines up to 97%. Various functionalities on aldimines were incorporated for hydroboration. The corresponding boryl amines were subjected to further hydrolysis to yield the corresponding secondary amines with good yields up to 89%. This protocol for the reaction demonstrates an atom-economic and green method with diverse imines that bears excellent functional group tolerance. Chemoselective reduction of imines was also attained, with good yields of 74–89%. We also propose the most plausible mechanism involving the formation of metal hydride as the active pre-catalyst.     

自动石墨消解–电感耦合等离子体质谱法同时测定左氧氟沙星胶囊中7种金属元素

建立自动石墨消解-电感耦合等离子体质谱法(ICP-MS)同时测定左氧氟沙星胶囊中铅、铬、砷、镉、锡、铝、铁7种金属元素含量的方法。以HNO3-H2O2()体积比为1∶1为消解体系,采用自动石墨消解法消解左氧氟沙星胶囊样品,消解液除酸后,用5%硝酸溶液定容至50 mL,采用电感耦合等离子体质谱法对消解液进行测定,以内标法定量。铅、铬、砷、镉、锡、铝、铁的质量浓度在0.05~20.0μg/mL范围内与质谱响应值成良好的线性关系,相关系数均大于0.998,方法检出限为0.119~1.323μg/kg。样品加标回收率为91.2%~105.5%,测定结果的相对标准偏差为1.67%~3.46%(n=6)。该方法样品前处理简单,检出限低,测定结果准确,适用于左氧氟沙星胶囊等沙星类抗生素中多种金属元素残留的测定。     

A facile route to germanium(IV) binaphthoxide complexes: crystal structure of a chiral resolved germanium(IV) binaphthoxide

A method for the facile synthesis of chiral germanium(IV) binaphthoxide complexes from the corresponding binaphthols and an organogermanium trichloride has been developed, which allows these unusual types of compounds to be synthesized in high yields. The crystal structure of one such complex, (S)-[Ge{O2C20H10(SiMe3)2-3,3'}{Cl}{Ph}], has been determined.     

A Porous Sulfonated 2D Zirconium Metal–Organic Framework as a Robust Platform for Proton Conduction

By using the strategy of pre-assembly chlorosulfonation applied to a linker precursor, the first sulfonated zirconium metal–organic framework ( JUK-14 ) with two-dimensional (2D) structure, was synthesized. Single-crystal X-ray diffraction reveals that the material is built of Zr₆O₄(OH)₄(COO)₈ oxoclusters, doubly 4-connected by angular dicarboxylates, and stacked in layers spaced 1.5 nm apart by the presence of sulfonic groups. JUK-14 exhibits excellent hydrothermal stability, permanent porosity confirmed by gas adsorption studies, and shows high (>10⁻⁴ S/cm) and low (<10⁻⁸ S/cm) proton conductivity under humidified and anhydrous conditions, respectively. Post-synthesis inclusion of imidazole improves the overall conductivity increasing it to 1.7×10⁻³ S/cm at 60 °C and 90 % relative humidity, and by 3 orders of magnitude at 160 °C. The combination of 2D porous nature with robustness of zirconium MOFs offers new opportunities for exploration of the material towards energy and environmental applications.     

Metal-Mediated Directional Capping of Rod-Packing Metal–Organic Frameworks

Two new rod-packing metal–organic frameworks (RPMOF) are constructed by regulating the in situ formation of the capping agent. In CPM-s7, carboxylate linkers extend 1D manganese-oxide chains in four additional directions, forming 3D RPMOF. The substitution of Mn²⁺ with a stronger Lewis acidic Co²⁺, leads to an acceleration of the hydrolysis-prone sulfonate linker, resulting in presence of sulfate ions to reduce two out of the four carboxylate-extending directions, and thus forming a new 2D rod-packing CPM-s8. Density functional theory calculations and magnetization measurements reveal ferrimagnetic ordering of CPM-s8, signifying the potential of exploring 2D RPMOF for effective low-dimensional magnetic materials.     

Assembly of ϵ-Keggin Polyoxometalate from Molecular Crystal to Zeolitic Octahedral Metal Oxide

Zeolitic octahedral metal oxides are inorganic crystalline microporous materials with adsorption and redox properties. New ϵ-Keggin nickel molybdate–based zeolitic octahedral metal oxides have been synthesized. ³¹P NMR spectroscopy shows that reduction of Mo^VI-based molybdates forms an ϵ-Keggin polyoxometalate that immediately transfers to the solid phase. Investigation of the formation process indicates that a low Ni concentration, insoluble reducing agent, and long synthesis time are the critical factors for obtaining the zeolite octahedral metal oxides rather than the ϵ-Keggin polyoxometalate molecule. The synthesized zeolitic nickel molybdate with Na⁺ is used as the adsorbent, which effectively separates C₂ hydrocarbon mixtures.     

Nitrogen Donor Protection for Atomically Precise Metal Nanoclusters

Surface organic ligands are critical in dictating the structures and properties of atomically precise metal nanoclusters. In contrast to the conventionally used thiolate, phosphine and alkynyl ligands, nitrogen donor ligands have not been used in the protection for well-defined metal nanoclusters until recently. This review focuses on recent developments in atomically precise metal nanoclusters stabilized by different types of nitrogen donor ligands, in which the synthesis, total structure determination and various properties are covered. We hope that this review will provide insights into the rational design of N donor-protected metal nanoclusters in terms of structural and functional modulation.     

Effect of textural characteristics on the catalytic performance of supported KCoMoS2 in the synthesis of higher alcohols from syngas

The influence of textural characteristics on the catalytic performance of supported KCoMoS₂ catalysts was explored to provide essential information for the design of better catalysts for the synthesis of higher alcohols (C₁–C₅) from syngas. Syngas conversion was carried out over KCoMoS₂ catalysts supported on various mesoporous (alumina and carbon-coated alumina) and microporous (two types of powdered activated carbons) materials. The experimental results show that catalysts supported over microporous materials exhibit higher catalytic activity in HAS from syngas than catalysts based on mesoporous materials.     

直接碳燃料电池燃料的研究进展

直接碳燃料电池(DCFC)是一种清洁高效利用碳资源发电的装置。其因能量转换率高,对环境污染小,燃料选择范围广等优点获得了越来越多的关注。DCFC的性能与使用的燃料密切相关,为了探究燃料对DCFC的影响,本文分别阐述了石墨、炭黑、中密度纤维板、生物质、煤、活性炭的特性及改性方法,分析讨论了燃料表面含氧官能团以及燃料中的金属催化剂对阳极电化学反应的促进作用,发现燃料表面化学性质要比比表面积更加重要。同时,本文也提出了对生物质这一优良的可再生资源的期待,为未来DCFC燃料的发展提供参考。     

The Early Steps of Molecule-to-Material Conversion in Chemical Vapor Deposition (CVD): A Case Study

Transition metal complexes with β-diketonate and diamine ligands are valuable precursors for chemical vapor deposition (CVD) of metal oxide nanomaterials, but the metal-ligand bond dissociation mechanism on the growth surface is not yet clarified in detail. We address this question by density functional theory (DFT) and ab initio molecular dynamics (AIMD) in combination with the Blue Moon (BM) statistical sampling approach. AIMD simulations of the Zn β-diketonate-diamine complex Zn(hfa)₂TMEDA (hfa = 1,1,1,5,5,5-hexafluoro-2,4-pentanedionate; TMEDA = N,N,N′,N′-tetramethylethylenediamine), an amenable precursor for the CVD of ZnO nanosystems, show that rolling diffusion of this precursor at 500 K on a hydroxylated silica slab leads to an octahedral-to-square pyramidal rearrangement of its molecular geometry. The free energy profile of the octahedral-to-square pyramidal conversion indicates that the process barrier (5.8 kcal/mol) is of the order of magnitude of the thermal energy at the operating temperature. The formation of hydrogen bonds with surface hydroxyl groups plays a key role in aiding the dissociation of a Zn-O bond. In the square-pyramidal complex, the Zn center has a free coordination position, which might promote the interaction with incoming reagents on the deposition surface. These results provide a valuable atomistic insight on the molecule-to-material conversion process which, in perspective, might help to tailor by design the first nucleation stages of the target ZnO-based nanostructures.